Author Topic: WT-800 and Trace Elliot Cabs  (Read 2020 times)

Offline Thunderbird

  • Newbie
  • *
  • Posts: 2
WT-800 and Trace Elliot Cabs
« on: September 27, 2004, 04:47:18 PM »
Could anyone please make some segestions on the best way to set this combo up to get as much power as possible.
 WT -800
 2x10 w/horn 200 watts
 2x10 no horn 200 watts
 4x10 w/horn 320 watts
 4x10 no horn 320 watts
 all cabs are trace elliot and 8 ohms
 Whats better? 6 10's per side? Link 2x10 and 4x10 together per side?
 The amp feels like it straining,preamp and master going to around 1:00 oclock.Is the wt-800 large enough to push these cabs?What can I do?
   Thanks
 

Offline LaneOnBass

  • Hero Member
  • *****
  • Posts: 9175
    • My Web Site
WT-800 and Trace Elliot Cabs
« Reply #1 on: September 27, 2004, 10:10:55 PM »
Try dual mono with the 4x10 cabs...or go bi-amp with 8 10s on the bottom and 4 on the top. Those are my best guesses...

Keep Thumpin',

Lane

Ask not what bass can do for you...
   Ask what YOU can do for bass.

www.laneonbass.com
Keep Thumpin',

Lane On Bass

Former Eden Spec. Proj. Coord. & Artist Relations

My Web Site | Facebook Page
Twitter

Offline Thunderbird

  • Newbie
  • *
  • Posts: 2
WT-800 and Trace Elliot Cabs
« Reply #2 on: September 28, 2004, 07:17:30 AM »
Thanks for the reply.Does duel mono mean link the 4x10 cabs together?Or plug them in seperately to one channel?Thanks for the help.