Author Topic: 112XST  (Read 9531 times)

Offline PAUL

  • Hero Member
  • *****
  • Posts: 565
    • http://www.myspace.com/paulnejman
112XST
« Reply #30 on: June 06, 2006, 11:10:19 AM »
Tim,before I hurt my back I was useing up to 3-210xlt cabs.So 610 would be sweet.No haunting here reality struck me in the face.I woke up this morning not being able to breath hard or lift my left arm above my head and limping.This will last about 3 days.Just a few things I have to put up with the rest of my life.If you can move that 610 around go for it.
If you did'nt like me before,your gonna love me now.Catch ya on the flip side.,,,,,Paul                                                        http://www.myspace.com/paulnejman                 http://myspace.com/60inchslick

Offline bassman639

  • Hero Member
  • *****
  • Posts: 5176
112XST
« Reply #31 on: June 06, 2006, 07:03:31 PM »
Paul ,i  really feel for ya,i hope in time you get somewhat better,i was in a car accident in 1990,ever since ,hard times,everything an effort,you feel like SH ** alot more than not,i myself ,get shots in the back every six months,it helps along with other meds,SO,I'll say a little sometum,somtum for ya,JUST DO YOUR BEST.


They wanted to operate ,they weren't giving me good odds,so,i told them ,when i'm in a wheel chair,then i 'll operate.


 I HOPE YOU GET GOOD ODDS,IF YOU GO THAT WAY

bassman639,play well
(tim moyle)
bass,the foundation of which everything rests on.
  I LOVE MY CXC


cxc110 (pitbull)
cx110ext cabinet
d112xltX2          
d210xlt, fender; P,JAZZ FRETLESS,Jazz ZONE  GEDDY LEE,IBANEZ 5
bassman639,play well
(tim moyle)
bass,the foundation of which everything rests on.
 
 
cxc110,
 wt550,d112xlt x2

i love my cxc110(pitbull)
         

Offline PAUL

  • Hero Member
  • *****
  • Posts: 565
    • http://www.myspace.com/paulnejman
112XST
« Reply #32 on: June 06, 2006, 08:05:34 PM »
Tim been down that route with the shots in the soft tissue of the back.It works for a couple weeks if definitely stops the nerve from burnning other than that does'nt do much.I'll eventually need a fusion.I have my good days and bad days.I go to chiropractor every week for decompression.Its the only thing that stops the burnning and the charlie horse in my calf so I can get alng with my day and walk..As long as I stay wihin my doctors restrictions I get along ok only a back ache everyday.Thats why its important to find a good sounding lightweight cab.........Hope all works out for you without a operation.   A good friend of mine was given 50 50 chance of walking if they operate on him.He was in a bad car wreck too.He had to stop drumming all together.

http://www.myspace.com/paulnejman                 http://myspace.com/60inchslick
If you did'nt like me before,your gonna love me now.Catch ya on the flip side.,,,,,Paul                                                        http://www.myspace.com/paulnejman                 http://myspace.com/60inchslick

Offline bassman639

  • Hero Member
  • *****
  • Posts: 5176
112XST
« Reply #33 on: June 06, 2006, 09:52:19 PM »
Paul,i do HOPE FOR THE BEST TO YOU.

50/50 thats something like i got,but see,i 'm still walking,,when i can't then give me 50/50




 Good luck my friend.

bassman639,play well
(tim moyle)
bass,the foundation of which everything rests on.
  I LOVE MY CXC


cxc110 (pitbull)
cx110ext cabinet
d112xltX2          
d210xlt, fender; P,JAZZ FRETLESS,Jazz ZONE  GEDDY LEE,IBANEZ 5
bassman639,play well
(tim moyle)
bass,the foundation of which everything rests on.
 
 
cxc110,
 wt550,d112xlt x2

i love my cxc110(pitbull)
         

Offline mojo

  • Hero Member
  • *****
  • Posts: 1326
112XST
« Reply #34 on: June 27, 2006, 06:21:23 PM »
Is it true that Sting has ordered a custom D112XST?
Mark
Gettin' my groove back
WT405, D210XLT, CX110(2x), D112XLT, D210T, N210-P(4), N10, LDS4X8 & TBC Stingray 5 style bass & Yamaha Basses

Offline RockNRollAl

  • Hero Member
  • *****
  • Posts: 4586
112XST
« Reply #35 on: June 27, 2006, 07:58:24 PM »
quote:
Originally posted by Bob Cruz

Interesting thought about swapping a 212 speaker into the 112 cabinet.  Also, I wonder how much difference it would make to add insulation to an otherwise unmodified 112 like RnR Al did to his NSP210 speaker?  He said it deepenend and warmed up that speaker while taming mids....Anyone with a 112 care to experiment?

Bob Cruz
"Live the life you love, love the life you live."



Bob,

Somewhere in this forum, endorka posted pictures of the inside of her 112XLT cab. There's already plenty of insulation inside. The 112XLT covers 32Hz to 14KHz (compare that to the D210XST's 30Hz to 14KHz).

I'm wondering how much an XST version will improve things - maybe go down to 25HZ??

I'm thinking about the 112XLT for my next cab.


www.RockNRollAl.com

Eden/Nemesis N28S - Eden/Nemesis NSP210 - Eden D210XST
I'm not a bassist. I'm just a guitarist/singer who uses Eden gear!
« Last Edit: June 27, 2006, 08:02:42 PM by RockNRollAl »
Nemesis N28S -  NC210P - NSP210(8Ω) - NSP210(4Ω)
Eden WT1205 -  WT405 - WTX260 - CXC110(WT390 head) - CX110
D410XLT(8Ω) - D210XST(8Ω)(x2) - D210XST(4Ω)(x3) - EM5's(x2) - WTDI
Roscoe LG3005 - Gretsch G2220 - Rogue VB100 - Ibanez GSRM20

Offline Bob Cruz

  • Hero Member
  • *****
  • Posts: 3654
112XST
« Reply #36 on: June 27, 2006, 08:40:31 PM »
quote:
Originally posted by RockNRollAl
Bob,

Somewhere in this forum, endorka posted pictures of the inside of her 112XLT cab. There's already plenty of insulation inside. The 112XLT covers 32Hz to 14KHz (compare that to the D210XST's 30Hz to 14KHz).

I'm wondering how much an XST version will improve things - maybe go down to 25HZ??

I'm thinking about the 112XLT for my next cab.


This is the post and there's a lot of uninsulated plywood inside the 112XLT.  I still think it would be a cool experiment to add insulation to that puppy.

http://www.eden-electronics.com/forum/topic.asp?TOPIC_ID=4914&SearchTerms=112

Bob Cruz
"Live the life you love, love the life you live."
Bob Cruz

GB Streamliner 900 and 600 - Peavey USA Cirrus 5 - SX Jazz 5 x2 - BC Rich Mockingbird 5 - Cruz 112 x2 (22 pound flyweight cabs I built) - Kustom 115 D140F - Avatar Neo 112 x 2 - Modded Fender Rumble 40 x2

Offline bassman639

  • Hero Member
  • *****
  • Posts: 5176
112XST
« Reply #37 on: June 28, 2006, 10:22:56 AM »
When i was in my early years,everyone ,use to put small SAND BAGS in the bottom of the cabinet ,then duct tape ,AND  some insulation, HEAVY LITTLE BUGGER,but the bass WAS bass

bassman639,play well
(tim moyle)
bass,the foundation of which everything rests on.
  I LOVE MY CXC


cxc110 (pitbull)
cx110ext cabinet
d112xltX2          
d210xlt, fender; P,JAZZ FRETLESS,Jazz ZONE  GEDDY LEE,IBANEZ 5
bassman639,play well
(tim moyle)
bass,the foundation of which everything rests on.
 
 
cxc110,
 wt550,d112xlt x2

i love my cxc110(pitbull)
         

Offline mojo

  • Hero Member
  • *****
  • Posts: 1326
112XST
« Reply #38 on: July 14, 2006, 04:06:46 PM »
See other thread:  My 112xst experiment: The Results! @ http://www.eden-electronics.com/forum/topic.asp?TOPIC_ID=5310&SearchTerms=experiment .

Mark
« Last Edit: July 14, 2006, 10:42:29 PM by mojo »
Mark
Gettin' my groove back
WT405, D210XLT, CX110(2x), D112XLT, D210T, N210-P(4), N10, LDS4X8 & TBC Stingray 5 style bass & Yamaha Basses

Offline mojo

  • Hero Member
  • *****
  • Posts: 1326
112XST
« Reply #39 on: February 04, 2007, 04:57:02 PM »
Dennis, do you still think a D112XST is still a good idea?


Mark

Gettin' my groove back
Mark
Gettin' my groove back
WT405, D210XLT, CX110(2x), D112XLT, D210T, N210-P(4), N10, LDS4X8 & TBC Stingray 5 style bass & Yamaha Basses

Offline ProDigit

  • Hero Member
  • *****
  • Posts: 3539
112XST
« Reply #40 on: February 04, 2007, 07:21:06 PM »
I think a D112XST will be deeper in size, and wheighs more!
The Neo's seem to be on their way.
According to Lane, they'll have more punch, and I hope they'll be LOUD cabinets!

Perfect fits for the WTX260
_______________________________________________________________________________________
Ibanez SRX, Fender Classic, WTX

Offline tfcreative

  • Hero Member
  • *****
  • Posts: 4609
112XST
« Reply #41 on: February 04, 2007, 08:00:13 PM »
quote:
Originally posted by ProDigit

I think a D112XST will be deeper in size, and wheighs more!
The Neo's seem to be on their way.
According to Lane, they'll have more punch, and I hope they'll be LOUD cabinets!



The 210xst is smaller and lighter than its xlt equivalent. Why would the 112xst be larger and heavier?

Todd
Tobias Classic V - Mike Tobias rocks the House
DC112XLT (390)
D112XLT
Todd
I mostly play my Jazzmaster custom nowadays, but I do at least still own some basses.

Offline Jesse

  • Hero Member
  • *****
  • Posts: 1238
    • Follow my music on Facebook
112XST
« Reply #42 on: February 09, 2007, 02:49:04 PM »
mmm yea 112XST.  I love the idea Dennis!


Jesse P

Fender American Jazz with S-1 Switching / Hartke 3500a / Eden D410XLT (8)
WT1205 / WT400 / D410XLT / D210XST / EM5s
1988 Pre Gibson Tobias Classic 5
Fender 60th Anniversary Jazz
Fender Classic 70s Precision
Warmoth Custom Fretless Jazz

Offline Fretlessboy

  • Hero Member
  • *****
  • Posts: 5816
  • We always come back to the garden
    • http://www.DennisMichaels.com
112XST
« Reply #43 on: February 10, 2007, 10:25:42 AM »
quote:
Originally posted by mojo

Dennis, do you still think a D112XST is still a good idea?


Mark

Gettin' my groove back




Yes I do. I think it would round out the agressiveness and be the bomb. Also, if they ever decided to do it, I would be the first in line to get it. The 112's kick and I am thinking about another one. The XST would be in my opinion a must have.

DennisMichaels

Eden endorser    
Wt550/WT1000/WT400/D210XST 4 ohm/ 212XLT 4 ohm X2/D112XLT
'03 Ken Smith 5M,
'06 Ken Smith fretless BSR5M
                                                                                                                                                                                                                                                                       
www.DennisMichaels.com
http://www.myspace.com/dennismichaelsbass
DennisMichaels
Rebuilding a piece at a time
www.facebook.com/dennismichaelsbassist

Offline Fretlessboy

  • Hero Member
  • *****
  • Posts: 5816
  • We always come back to the garden
    • http://www.DennisMichaels.com
112XST
« Reply #44 on: February 10, 2007, 10:27:34 AM »
I would love to see Eden do a 112 XST driver even if they do not design a box for ir. You could order the speaker and put it in any cab you have. I would load in the bottom possition of each of my 212 cabs.

DennisMichaels

Eden endorser    
Wt550/WT1000/WT400/D210XST 4 ohm/ 212XLT 4 ohm X2/D112XLT
'03 Ken Smith 5M,
'06 Ken Smith fretless BSR5M
                                                                                                                                                                                                                                                                       
www.DennisMichaels.com
http://www.myspace.com/dennismichaelsbass
DennisMichaels
Rebuilding a piece at a time
www.facebook.com/dennismichaelsbassist