Author Topic: nemesis  (Read 1512 times)

Offline grice1

  • Newbie
  • *
  • Posts: 16
« on: May 21, 2006, 12:19:55 PM »
just got a nc250 and was wondering if I could add a nemesis 210 extension cab on it.
WT-550/210 XST-4/NC-210
Spector 5/ Carvin LB60

Offline darkothrone

  • Sr. Member
  • ****
  • Posts: 352
« Reply #1 on: May 21, 2006, 01:36:51 PM »
sure man, why not... the exact same question brought me here on the forum... its a great place to learn you know, and i've learned here that your extension cab should be 4 ohms,to get the most out of your amp, because the internal speakers are wired in series and that means that by adding a 4 ohm cab... you get a total impendance of 8 ohms and your power reduces from 250 watts to about 175w, but dont worry about that, in reality, this only means that your master level will be a couple clicks higher than without an extension cab, and the added mass is incredible.. try it out.

and welcome to the garden, feel free to ask anything else...


  • Hero Member
  • *****
  • Posts: 774
« Reply #2 on: May 21, 2006, 05:26:14 PM »
hey grice, welcome to the garden, try askin this in "Eden General" you'll get a better response.

Warwick Jazzman
H***ke Rig :(