Author Topic: New amp 2004 Eden WT 330 210 combo  (Read 7132 times)

Offline Rip Van Dan

  • Moderator
  • Hero Member
  • *****
  • Posts: 2573
Re: New amp 2004 Eden WT 330 212 comb
« Reply #15 on: August 28, 2016, 10:39:45 PM »
screen shot from 2003 catalog shows it is an 8 ohm set up, as I posted above.

Dan
Rip Van Dan
Dan Gracia
'82 US-made Fender Jazz Bass with maple neck
5-string Rogue LX405 Pro (Surprisingly good "no-name" bass)
WT500/800 Highwayman (signature model)
D.N.S 410-8, Eden EX112 x2
Line6 G10s wireless
==
spares:
Eden RS400, GK BK250, BPX115 cab, acoustic B410 cab, Sunn Beta 202 (2x12)

Offline Dbtoys

  • Newbie
  • *
  • Posts: 28
Re: New amp 2004 Eden WT 330 212 comb
« Reply #16 on: August 28, 2016, 10:59:22 PM »
Ok so for best lows and more sound a 8 ohm 212?
Then to connect use 1/4 inch or the speak on conect?
Danny B

Offline Rip Van Dan

  • Moderator
  • Hero Member
  • *****
  • Posts: 2573
Re: New amp 2004 Eden WT 330 212 comb
« Reply #17 on: August 29, 2016, 01:30:26 PM »
Yup, adding an 8 ohm 212 to it will put a 4 ohm load on the amp and it will put out 330-watts instead of the 250 using just the internal speakers.   You could certainly use the 1/4" plugs on those but your amp has both 1/4" outputs and banana plug outputs.   Banana plug to a Speakon connector is a better choice just because it is a better connection and there is little chance of the plug coming out of the speaker unexpectedly (speakons twist-lock to engage).  That's what I use on mine and I just made my own cord out of of some 12-guage (heavier than I really needed) wire and added a banana connector on one end and a Speakon connector  on the other.

Dan
Rip Van Dan
Dan Gracia
'82 US-made Fender Jazz Bass with maple neck
5-string Rogue LX405 Pro (Surprisingly good "no-name" bass)
WT500/800 Highwayman (signature model)
D.N.S 410-8, Eden EX112 x2
Line6 G10s wireless
==
spares:
Eden RS400, GK BK250, BPX115 cab, acoustic B410 cab, Sunn Beta 202 (2x12)

Offline Dbtoys

  • Newbie
  • *
  • Posts: 28
Re: New amp 2004 Eden WT 330 212 comb
« Reply #18 on: August 29, 2016, 09:01:28 PM »
Thanks rip

Danny B  8)
Danny B

Offline Dbtoys

  • Newbie
  • *
  • Posts: 28
Re: New amp 2004 Eden WT 330 212 comb
« Reply #19 on: August 30, 2016, 08:11:57 PM »
Danny B

Offline Dbtoys

  • Newbie
  • *
  • Posts: 28
Re: New amp 2004 Eden WT 330 212 comb
« Reply #20 on: August 30, 2016, 08:17:49 PM »
[
Danny B

Offline Dbtoys

  • Newbie
  • *
  • Posts: 28
Re: New amp 2004 Eden WT 330 212 comb
« Reply #21 on: August 30, 2016, 08:25:12 PM »

Danny B

Offline Bob Cruz

  • Hero Member
  • *****
  • Posts: 3654
Re: New amp 2004 Eden WT 330 212 comb
« Reply #22 on: August 30, 2016, 10:39:41 PM »
4 Ohm Min = the minimum ohms your amp can handle, except that the WT330 can handle 2 ohms all night long!  It doesn't tell you what your internal speakers are, and Dan got that information for you--they're 8 ohms.  So you really have a lot of flexibility when adding more speakers.  I'd start with something rated at 8 ohms and see whether you still need more.  If you like what you're hearing from the combo, another 212 is a great choice.  Cheers, Bob
« Last Edit: August 31, 2016, 10:54:08 AM by Bob Cruz »
Bob Cruz

GB Streamliner 900 and 600 - Peavey USA Cirrus 5 - SX Jazz 5 x2 - BC Rich Mockingbird 5 - Cruz 112 x2 (22 pound flyweight cabs I built) - Kustom 115 D140F - Avatar Neo 112 x 2 - Modded Fender Rumble 40 x2

Offline Dbtoys

  • Newbie
  • *
  • Posts: 28
Re: New amp 2004 Eden WT 330 212 comb
« Reply #23 on: November 06, 2017, 09:46:29 PM »
So if i bought a 4 OHM 210 xst cab how would i hook it up so the combo spkrs and the new cab make 2.6 ohms?
Danny B

Offline Paulinderwick

  • Hero Member
  • *****
  • Posts: 1290
    • Jimmy C and the Bluesdragons
Re: New amp 2004 Eden WT 330 212 comb
« Reply #24 on: November 07, 2017, 03:02:44 AM »
Assuming that it has a speakon connection simply connect it to the speakon connector at the back of the amp - the amp doesn't need to be reset or adjusted it should just work and the total connected load will be 2.67ohms - otherwise use the other 1/4" speaker connection output, next to the one that connects the internal speaker... make sure you have the master volume right down and then bring it up gently - that will be LOUD!!!
UK member, WT330, WTX260, 2 x EX112 (both 4 ohm), WTDI, and a Microtour as well as a Roland Super Cube Bass, Blackstar HT5, Fender Jazz '67, Fretless Fender Jazz '70, Burns Barracuda, Epiphone EB-0, Ashbory, Stagg EUB and guitars and ukuleles and a mandolin as well

Offline Dbtoys

  • Newbie
  • *
  • Posts: 28
Re: New amp 2004 Eden WT 330 212 comb
« Reply #25 on: November 07, 2017, 08:05:19 PM »
Thanks  8)
Danny B

Offline Rip Van Dan

  • Moderator
  • Hero Member
  • *****
  • Posts: 2573
Re: New amp 2004 Eden WT 330 212 comb
« Reply #26 on: November 08, 2017, 11:47:40 AM »
Yeah, definitely use the speakon output to your external speaker.  Your WT330 will handle a minimum load of 2 ohms, so you should be just fine with 2.67 load on it.  That D210XST added to your internal speakers should give all kinds of sound!

Dan
Rip Van Dan
Dan Gracia
'82 US-made Fender Jazz Bass with maple neck
5-string Rogue LX405 Pro (Surprisingly good "no-name" bass)
WT500/800 Highwayman (signature model)
D.N.S 410-8, Eden EX112 x2
Line6 G10s wireless
==
spares:
Eden RS400, GK BK250, BPX115 cab, acoustic B410 cab, Sunn Beta 202 (2x12)

Offline Dbtoys

  • Newbie
  • *
  • Posts: 28
Re: New amp 2004 Eden WT 330 212 comb
« Reply #27 on: November 12, 2017, 01:05:18 PM »
This is another Question when playing live should i use a di or use the one  on this amp and why??   :-\

And how should i send the signal??
« Last Edit: November 12, 2017, 01:07:52 PM by Dbtoys »
Danny B

Offline Paulinderwick

  • Hero Member
  • *****
  • Posts: 1290
    • Jimmy C and the Bluesdragons
Re: New amp 2004 Eden WT 330 212 comb
« Reply #28 on: November 12, 2017, 04:32:26 PM »
Personally I'd use (and do use) the DI from the amp - it can be switched to send a signal either pre or post the EQ section and the level is controllable - I have never had a sound-man complain about the signal.  Of course if you find that sound-men don't like the signal then you could add a DI in front (and some might prefer that but then they would also probably want to use their own anyway).  See how it goes...
Can I separately suggest that instead of adding more questions to this thread you start off a new thread instead, lot's of people will look at the first couple of posts, note that it started in 2016 and ignore it.  I think you will get a much better response...
UK member, WT330, WTX260, 2 x EX112 (both 4 ohm), WTDI, and a Microtour as well as a Roland Super Cube Bass, Blackstar HT5, Fender Jazz '67, Fretless Fender Jazz '70, Burns Barracuda, Epiphone EB-0, Ashbory, Stagg EUB and guitars and ukuleles and a mandolin as well

Offline Dbtoys

  • Newbie
  • *
  • Posts: 28
Re: New amp 2004 Eden WT 330 212 comb
« Reply #29 on: November 12, 2017, 04:47:53 PM »
ok thanks
Danny B