Author Topic: Transformer for WT-1550  (Read 1979 times)

Offline alotabass

  • Newbie
  • *
  • Posts: 9
Re: Transformer for WT-1550
« Reply #15 on: April 20, 2017, 07:54:35 PM »

My fried transformer got a new winding and its running again!
Not much help from Eden CS, but I managed to get all specs myself.

Thanks to all for encouraging words and if somebody need specs for his fried WT1550 transformer, I will happily mail it.

I am in desperate need of these specs for the transformer for my WT1550. Please help. I can send you my emai address.

Offline Bob Cruz

  • Hero Member
  • *****
  • Posts: 3648
Re: Transformer for WT-1550
« Reply #16 on: April 20, 2017, 11:33:14 PM »
Hi alotabass, there's no chance the people who posted in this thread years ago will see your requests.  You can try sending them a private message but there is a minimum number of posts you need to be able to do that as a new member (to prevent spamming; believe me we've seen a lot of it).  I don't know how many posts it takes but you can go to the "testing" folder and have fun posting nonsense until the system allows you to send a PM.  Good luck, Bob
Bob Cruz

GB Streamliner 900 and 600 - Mesa WalkAbout - Peavey USA Cirrus 5 - SX Jazz 5 x2 - BC Rich Mockingbird 5 - Cruz 112 x2 (22 pound flyweight cabs I built) - Kustom 115 D140F - Avatar Neo 112 x 2 - Modded Fender Rumble 40 x2

Online Paulinderwick

  • Hero Member
  • *****
  • Posts: 1217
    • Jimmy C and the Bluesdragons
Re: Transformer for WT-1550
« Reply #17 on: April 21, 2017, 02:51:34 AM »
I think the minimum is five so it should be possible to message - but whether someone still has the same contact details???  Good luck...
UK member, WT330, WTX260, 2 x EX112 (both 4 ohm), WTDI, and a Microtour as well as a Roland Super Cube Bass, Blackstar HT5, Fender Jazz '67, Fretless Fender Jazz '70, Burns Barracuda, Epiphone EB-0, Ashbory, Stagg EUB and guitars and ukuleles and a mandolin as well