Author Topic: CXC112/WT330  (Read 775 times)

Offline smurfy27

  • Newbie
  • *
  • Posts: 1
CXC112/WT330
« on: March 30, 2009, 10:14:04 AM »
Has anyone had any experience removing the WT330 head from the CXC112?  If so, is it the full head or would I need to get a chasis for it?
 

Offline RockNRollAl

  • Hero Member
  • *****
  • Posts: 4586
CXC112/WT330
« Reply #1 on: March 30, 2009, 10:20:54 AM »
It is the full head.

Just be careful when removing the screws from the top of the combo (four screws on top). The nuts are only glued on, they can fall off into the inside of the amp. If that happens, you'll have to open the amp and get them out before you power up the amp again.

Just turn the amp upside down and shake it, listen for rattling - if you hear rattling, then a nut or two came loose.


www.RockNRollAl.com

Nemesis N28S -  NC210P - NSP210(8) - NSP210(4)
Eden WT1205 -  WT405 - WTX260 - CXC110(WT390 head) - CX110
D210XST(8)(x2) - D210XST(4)(x2) - EM5's(x2)
Rogue VB100 - Ibanez GSRM20
Nemesis N28S -  NC210P - NSP210(8Ω) - NSP210(4Ω)
Eden WT1205 -  WT405 - WTX260 - CXC110(WT390 head) - CX110
D410XLT(8Ω) - D210XST(8Ω)(x2) - D210XST(4Ω)(x3) - EM5's(x2) - WTDI
Roscoe LG3005 - Gretsch G2220 - Rogue VB100 - Ibanez GSRM20

Offline Bassmann1968

  • Administrator
  • Hero Member
  • *****
  • Posts: 11976
CXC112/WT330
« Reply #2 on: March 30, 2009, 02:10:01 PM »
It'a a good idea to remove them anyway [;)]

Armin
_______________________________________________________________________________________
D112XLT/8, D210XLT/8, D210XST/8, D410XLT/8, D810RP/4,
WP100B, WT1000, WT1205, WTX260, EM5 [:D]
ESH Souvereign IV,V,VI fretted and frettless
ESH Various V,ESH Notorius IV and V fretted, Ibanez Acoustic
H&K Bassmaster, Boss GT6-B, Furman PL8-E, Korg DT1 Pro
Armin

PLEASE LIKE EDEN ON FACEBOOK!!!
No schematics available!!! Don't ask for it.
;)

WTP-Pre,1350,WTX260,WT300/400,WT1000,WTX1000N,NAV,WTDI
D112XLT,D210XST,D410XLT,D810RP,DNS410,DNS112